Jump to content
marat

самодельные вспомогательные устройства для носителей OPUS2

Recommended Posts

крышка батарейного отсека от OPUS2 напечатана на 3G принтере .модифицирована .есть с блютуз приемником .есть с стандартным аудио гнездом (совместимым со всеми сотовыми телефонами )все крышки снабжены также USB портами -штеккерами совместимыми со всеми видами зарядных устройств сотовых телефонов

9b45615e-1fc1-474b-a2e9-7bd9f684c2ae (1).jpg

4953ccff-a258-417c-94f5-b979c183b74e.jpg

WhatsApp Image 2019-01-06 at 15.41.32.jpeg

Share this post


Link to post
Share on other sites

Share this post


Link to post
Share on other sites

the photo shows a cover (on the OPUS2 battery compartment) printed on a 3G printer (it is grayish-white. photo  the cover is equipped with an audio jack (compatible with all cell phones, also a USB port-plug (also compatible with connectors for all cell phone chargers). on the photo. a cover with an electronic card attached to it — a bluetooth receiver--(connected to an OPUS2 battery or battery compartment), and a USB port plug. 4. picture shows (connect easy also Like a proprietary OPUS2 cover with a direct FM plug for connecting to a cell phone) the connector where the bluetooth -receiver and USB plug are connected. The bluetooth receiver- is connected to the power supply (battery, battery), it is possible to track the charge level of the battery part of OPUS2. (at photo there is a screen snapshot showing the charge level of the battery compartment OPUS2). On photo 3 there is a fee that can be bought for aliexpress for $ 2. You insert a AAA type AA battery in it (very common in everyday life It is used in TV remote controllers and costs $ 0.1 to 40 tenge). This board converts the voltage from 1.5 volts to 4.5 volts (which goes to OPUS2). You connect this board to the USB port plug (photo 6.) of this cover (on similarity as a baby-power bank) 

Share this post


Link to post
Share on other sites

Hi @marat

Welcome to HearPeers! Thank you for sharing your interesting photos, but just so you know  MED-EL does not encourage modifying your audio processors. Doing so could cause damage to your processor. 

If you would like to share more information about your hearing journey, or tips and tricks with other users then this forum is a great place to do so. 

Kind regards,  

Mary 

Share this post


Link to post
Share on other sites

it is not setup! for setup the special equipment is necessary! you attentively once again read and examine! I just integrated bluetooth-receiver with the speech processor, added everywhere used - cheap audio the slot, simplified - reduced the price of a way of charging having included in construction usb-port which can connect to chargers of cell phones actually modified the speech processor. these improvements do not influence settings in any way and cannot damage речевй the processor. I gave you the idea of future model of the hearing aid with an implant.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×