Jump to content

Monitoring Mode?


Recommended Posts

Just curious what this does/is intended for. I don't yet have many programs set up for either processor so right now it just seems to turn the microphone off. 

Link to comment
Share on other sites

  • HearPeers Heroes


It’s a way to mute and a way to use a microphone test device for young CI users to check that the microphones are working


Monitoring mode
When pressing the MT button for 3 seconds, the FineTuner Echo changes into the monitoring mode. The symbol � appears on the bottom of the display. The monitoring mode is used with the SONNET MTD. For further information about this optional service tool for the MED‐EL Cochlear Implant System, please read the applicable user manual or ask your audiologist for assistance.
In addition, you can switch your audio processor to silent mode if required.

Link to comment
Share on other sites

  • 2 months later...

I found a use for it today. Leaf blowing time. Our leaf blower is a noisy two-stroke system. I changed the monitoring mode in AudioKey and didn’t have to remove my processor. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...