marat Posted January 6, 2019 Report Share Posted January 6, 2019 крышка батарейного отсека от OPUS2 напечатана на 3G принтере .модифицирована .есть с блютуз приемником .есть с стандартным аудио гнездом (совместимым со всеми сотовыми телефонами )все крышки снабжены также USB портами -штеккерами совместимыми со всеми видами зарядных устройств сотовых телефонов Quote Link to comment Share on other sites More sharing options...
HearPeers Heroes Mary Beth Posted January 6, 2019 HearPeers Heroes Report Share Posted January 6, 2019 @MED-EL Moderator Quote Link to comment Share on other sites More sharing options...
marat Posted January 7, 2019 Author Report Share Posted January 7, 2019 Quote Link to comment Share on other sites More sharing options...
marat Posted January 7, 2019 Author Report Share Posted January 7, 2019 the photo shows a cover (on the OPUS2 battery compartment) printed on a 3G printer (it is grayish-white. photo the cover is equipped with an audio jack (compatible with all cell phones, also a USB port-plug (also compatible with connectors for all cell phone chargers). on the photo. a cover with an electronic card attached to it — a bluetooth receiver--(connected to an OPUS2 battery or battery compartment), and a USB port plug. 4. picture shows (connect easy also Like a proprietary OPUS2 cover with a direct FM plug for connecting to a cell phone) the connector where the bluetooth -receiver and USB plug are connected. The bluetooth receiver- is connected to the power supply (battery, battery), it is possible to track the charge level of the battery part of OPUS2. (at photo there is a screen snapshot showing the charge level of the battery compartment OPUS2). On photo 3 there is a fee that can be bought for aliexpress for $ 2. You insert a AAA type AA battery in it (very common in everyday life It is used in TV remote controllers and costs $ 0.1 to 40 tenge). This board converts the voltage from 1.5 volts to 4.5 volts (which goes to OPUS2). You connect this board to the USB port plug (photo 6.) of this cover (on similarity as a baby-power bank) Quote Link to comment Share on other sites More sharing options...
MED-EL Moderator Posted January 7, 2019 Report Share Posted January 7, 2019 Hi @marat, Welcome to HearPeers! Thank you for sharing your interesting photos, but just so you know MED-EL does not encourage modifying your audio processors. Doing so could cause damage to your processor. If you would like to share more information about your hearing journey, or tips and tricks with other users then this forum is a great place to do so. Kind regards, Mary Quote Link to comment Share on other sites More sharing options...
marat Posted January 7, 2019 Author Report Share Posted January 7, 2019 it is not setup! for setup the special equipment is necessary! you attentively once again read and examine! I just integrated bluetooth-receiver with the speech processor, added everywhere used - cheap audio the slot, simplified - reduced the price of a way of charging having included in construction usb-port which can connect to chargers of cell phones actually modified the speech processor. these improvements do not influence settings in any way and cannot damage речевй the processor. I gave you the idea of future model of the hearing aid with an implant. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.